L’industrie chimique doit relever de nombreux défis pour évoluer vers une chimie plus verte, capable de concevoir efficacement des molécules fonctionnelles biosourcées. Le carbonate de glycérol (CG) est l’une de ces molécules plateformes prometteuses. Non toxique, biodégradable, stable sur une large gamme de température et dotée d’un caractère bifonctionnel (groupe hydroxyle primaire et carbonate cyclique), ces propriétés le rendent attractif comme solvant dans les batteries lithium ou comme additif dans les formulations cosmétiques et pharmaceutiques. Or, un procédé de synthèse optimisé permettrait d’envisager une production localisée en Europe.
Ce travail de thèse propose une voie de synthèse plus durable du CG, par transcarbonatation du glycérol (Gly), coproduit du biodiesel, avec le carbonate de diéthyle (DEC), en associant un catalyseur hétérogène et une démarche d'écoconception. Le DEC a été retenu de préférence au carbonate de diméthyle, car l'éthanol coproduit ne forme pas d'azéotrope avec le DEC, ce qui facilite sa séparation et permet la valorisation ultérieure de l’alcool. La démarche des travaux s'articule autour de quatre volets complémentaires.
Un premier travail de criblage catalytique a permis d'identifier un oxyde mixte, le catalyseur hétérogène KNO3/CaO qui offre le meilleur compromis entre activité catalytique, sélectivité de CG et stabilité. La transcarbonatation a été effectuée dans un réacteur batch à 110 °C, conduisant à une conversion de 92,0 % de Gly, avec un rendement en CG de 88,0 % sans apparition de produits secondaires, après 3 h de réaction. La caractérisation du catalyseur a permis d’accéder aux propriétés de surface et de basicité gouvernant son activité catalytique.
Deuxièmement, un modèle thermodynamique d’équilibre de phases basé sur le modèle NRTL a été établi, à l’aide d’un outil de simulation, pour décrire le milieu réactionnel non idéal. Le milieu présente une miscibilité partielle entre les deux réactifs, tandis que la formation d’éthanol engendre la formation d’une phase vapeur et favorise, avec le CG, l’homogénéisation complète du mélange réactionnel. Les modèle NRTL et les coefficients d’interaction binaires associés doivent reproduire ces transitions de phases au cours de la réaction : équilibres liquide liquide, liquide liquide vapeur et liquide vapeur.
Par ailleurs, une étude cinétique, couplée à l’optimisation des paramètres opérationnels, a montré l’intérêt de développer un modèle hétérogène de type Langmuir Hinshelwood, typiquement employé dans le cadre de la catalyse hétérogène, qui intègre explicitement le comportement réactionnel à proximité et à la surface du catalyseur. Le modèle proposé représente fidèlement la dynamique de la composition du milieu réactionnel au cours de temps.
Enfin, un couplage du modèle thermodynamique et du modèle cinétique a été appliqué à la simulation d’un procédé intensifié en mode batch, rassemblant au sein d’une même unité la production du CG et la séparation de coproduit éthanol, dans les conditions d’une distillation réactive. Les résultats de la simulation, obtenus avec le logiciel BatchColumn, ont été confrontés à des essais sur une installation à l’échelle laboratoire et ont validé les résultats avec une conversion du Gly (89,0 %), un rendement en CG (84,0 %) et une pureté élevée pour l’éthanol récupéré (99,9 %).
Ce projet de thèse propose une approche cohérente pour l’écoconception d’un procédé de production du carbonate de glycérol, en couplant un travail de recherche sur la chimie de synthèse avec le génie des procédés.
|
The chemical industry faces numerous challenges in its transition towards a greener chemistry, capable of an efficiently design of bio based functional molecules. Glycerol carbonate (GC) is one such promising platform molecule. Non toxic, biodegradable, stable over a wide temperature range and endowed with a bifunctional character (a primary hydroxyl group and a cyclic carbonate), these properties make it attractive as a solvent in lithium batteries or as an additive in cosmetic and pharmaceutical formulations. An optimised synthesis process would make possible a localised production in Europe.
This thesis proposes a more sustainable synthesis route to GC, through the transcarbonation of glycerol (Gly), a coproduct of the production of biodiesel, with diethyl carbonate (DEC), combining a heterogeneous catalyst with an ecodesign approach. DEC was preferred over dimethyl carbonate because the coproduced ethanol does not form an azeotrope with DEC, which facilitates its separation and enables the subsequent valorisation of the alcohol. The work is organised around four complementary parts.
Firstly, the catalyst screening identified a mixed oxide, the heterogeneous catalyst KNO₃/CaO, offering the best compromise between catalytic activity, GC selectivity and stability. Transcarbonation was carried out in a batch reactor at 110 °C, leading to a 92.0 % glycerol conversion with an 88.0 % GC yield and no side reaction after 3 h of process. Catalyst characterisation provided access to the surface and basicity properties governing its catalytic activity.
In addition, a kinetic study, coupled with the optimisation of operating parameters, demonstrated the importance of developing a heterogeneous Langmuir Hinshelwood model, typically used in heterogeneous catalysis, which explicitly accounts for the reaction behaviour near and at the catalyst surface. The proposed model accurately represents the dynamics of the reaction mixture composition over time.
Finally, a coupling of the thermodynamic and kinetic models was applied to the simulation of an intensified batch process, combining GC production and the separation of the ethanol coproduct within a single unit, under reactive distillation conditions. The simulation results, obtained with the BatchColumn software, were compared with experiments on a laboratory scale installation and validated the coupling of the models, with a glycerol conversion of 89.0 %, a GC yield of 84.0 % and a high purity of the recovered ethanol of 99.9 %.
This thesis proposes a coherent approach to the ecodesign of a GC production process, coupling research on synthesis chemistry with process engineering.
|