Le besoin de convertisseurs légers, compacts, et performants pour les applications de traction automobile, ainsi que l’augmentation de la tension des batteries ont poussé l’industrie à se tourner vers de nouveaux composants semi-conducteur à grand gap. En particulier, les modules MOSFET en carbure de silicium (SiC) remplacent les IGBT au silicium, proposant des vitesses de commutation élevées, des pertes réduites, et un fonctionnement à haute température. Afin de limiter leur coût, ces modules n’intègrent pas systématiquement de diode de roue libre à barrière Schottky (SBD), forçant l’utilisation de leur diode de corps intrinsèque pendant les phases de temps-mort, avec un impact sur les pertes et la fiabilité du MOSFET SiC. La gestion optimale du temps-mort devient cruciale pour ces composants, et les circuits intégrés de commande de grille (Gate-Drivers) sont amenés à répondre à de nouveaux enjeux de rapidité et de fiabilité.
L’objectif de cette thèse, réalisée dans le cadre du laboratoire commun SEMA en partenariat avec le laboratoire LAPLACE et la société NXP Semiconductors, est de développer un système de gestion adaptative du temps-mort intégré dans un gate-driver CMOS. Après étude de l’état de l’art, plusieurs méthodes existants ont été identifiées, certaines nécessitant l’ajout de composants externes ou la mesure de potentiels élevés (plusieurs centaines de volts). D’autres n’étant pas applicables en temps-réel à un onduleur dont le point d’opération varie continuellement.
L’approche retenue repose sur la mesure du courant de grille du composant de puissance, directement accessible depuis le circuit de commande, pour déterminer la durée optimale du temps-mort en temps-réel. Un prototype de circuit de commande a été entièrement conçu en technologie SMARTMOS10 de NXP afin de valider le concept. Ce circuit intégré dispose d’un système de copie interne du courant de grille, d’un bloc de détection de fin de commutation, et d’un circuit logique interne permettant d’amorcer automatiquement le MOSFET SiC au moment optimal. Par rapport à l’état de l’art, cette méthode garantit une vitesse de réaction maximale et une robustesse face aux parasites tout en évitant l’utilisation de composants discrets externes ainsi que de tout composant haute tension supplémentaire.
Un banc de test a été mis en place pour valider le fonctionnement du prototype dans un environnement haute tension (800 V) et fort courant (450 A) représentatif des conditions d’opération d’un onduleur de traction automobile. Les mesures expérimentales montrent une détection de la fin de la commutation avec un retard inférieur à 20 ns grâce à la bande passante élevée des circuits analogiques. Le gate-driver est capable d’amorcer automatiquement le transistor complémentaire dès la détection de ce signal afin de limiter la durée de temps-mort au strict minimum. Cette méthode d’adaptation garantit un temps de conduction minimal de la diode de corps afin de réduire les pertes par conduction ainsi que les dégradations associées à l’utilisation de ces diodes. |
The need for lightweight, compact, and high-performance power converters for automotive traction applications, together with the increase in battery voltage levels, has driven the industry toward the adoption of new wide-bandgap semiconductor devices. In particular, silicon carbide (SiC) MOSFET modules are replacing silicon IGBTs, offering higher switching speeds, lower losses, and high-temperature operation. To reduce costs, these modules do not always integrate a Schottky Barrier Diode (SBD), requiring the use of the intrinsic body diode during dead-time intervals, which impacts both losses and the reliability of the SiC MOSFET. As a result, optimal dead-time management has become crucial for these devices, and gate-driver integrated circuits must address new challenges in terms of speed and reliability.
The objective of this PhD research, conducted within the SEMA joint laboratory in partnership with the LAPLACE laboratory and NXP Semiconductors, is to develop an adaptive dead-time management system integrated into a CMOS gate driver. Following a review of the state of the art, several existing methods were identified, some requiring additional external components or the measurement of high voltages reaching several hundred volts. Other approaches are not suitable for real-time operation in inverters whose operating conditions continuously vary.
The proposed approach relies on measuring the gate current of the power device, which is directly accessible from the gate-driver circuit, to determine the optimal dead-time duration in real time. A gate-driver prototype was fully designed in NXP’s SMARTMOS10 technology to validate the concept. The integrated circuit incorporates an internal gate-current replication system, an end-of-switching detection block, and internal logic capable of automatically turning on the SiC MOSFET at the optimal instant. Compared with existing solutions, this method provides maximum reaction speed and strong immunity to electrical noise while avoiding the use of external discrete components or additional high-voltage circuitry.
A dedicated test bench was developed to validate the prototype under high-voltage (800 V) and high-current (450 A) conditions representative of automotive traction inverter operation. Experimental results demonstrate end-of-switching detection with a delay of less than 20 ns thanks to the high bandwidth of the analog circuits. The gate driver is able to automatically turn on the complementary transistor immediately after detection of this event, thereby reducing dead time to the minimum required value. This adaptive method ensures minimal body-diode conduction time, reducing both conduction losses and the degradation mechanisms associated with the use of body diodes. |